2-in-1 digital moisture meter for wood and building materials

Want to check the moisture content of wood, floors or walls? The LUSQ 2-in-1 moisture meter is ideal for tracking down leaks, picking the perfect firewood and much more! From DIYers to experienced builders, this moisture and temperature meter is suitable for everyone. With separate measuring ranges for wood and building materials (see below), it works on a wide range of materials.

2-in-1 operation

This moisture meter offers 2 different ways of measuring the moisture percentage. Firstly, you can push the 2 electrodes into the material you're measuring; this gives a very accurate reading. The downside of this method is that it leaves 2 small holes in the material. You can avoid that with the second option on this device: you can also measure the moisture percentage by holding the back of the moisture meter against the material. That way you avoid annoying damage to your materials!

Prevention is better than cure

Spotted suspicious stains on the floor or wall? You might have a leak! With this moisture meter, you'll find out within seconds, so you can easily prevent damage.
Before hanging wallpaper, it's also important to measure the moisture percentage first. That way you can be sure your wallpaper or levelling compound stays put!

Display and data memory

The handy data-hold function lets you easily freeze the reading. Ideal when you want to write the measurement down! Thanks to the backlit LCD screen, you can always read measurements effortlessly, even on a sunny day or in the dark in the evening.

Long battery life

For all these functions, the moisture meter needs nothing more than 2 AAA batteries, which are of course included. On these 2 batteries, the moisture meter lasts up to 6 hours! And the battery indicator in the top right of the screen makes it easy to see when the batteries are running low.

Measuring range using the electrodes

• Wood - 5-50%
• Building materials - 1.5-33%
• Temperature - 0-40°C

Measuring range using the moisture sensor on the back

• Softwood & cork - 0-53%
• Hardwood - 0-35%
• Building materials - 0-85%

Please note: The moisture meter cannot measure through non-porous materials. This means, for example, that it cannot measure the moisture content of wood behind a melamine layer. The same applies to tiles, which in most cases are not porous.

Choose the LUSQ® 2-in-1 moisture meter and do your DIY without worry.
Not satisfied? You have 14 days to change your mind.