DIY & tools

The laser distance meter measures up to 60 metres with an accuracy of ±2 mm. Besides distance, it also measures area and volume, and you can use the Pythagoras function or measure continuously. It stores the last 20 measurements and shows metres, feet or inches on a backlit display. The 2 AAA batteries are included and last for up to 5000 measurements.

Use the wall detector before you drill. It finds wooden studs, metal pipes and electrical wiring up to 120 mm deep in the wall. You choose from 4 modes: wood, metal, a deep scan and a precision mode to mark the exact spot. After switching on, it calibrates itself; an indicator light and a warning signal show where you had better not drill.

With a cross line laser you lay tiles, fit a kitchen or hang shelves and pictures straight. The 4D cross line laser levels itself and projects 4, 8, 12 or 16 lines, 360° all around, with a working range of up to 50 metres. It is dust- and splash-proof to IP54 and runs on a rechargeable battery. A magnetic wall bracket, tripod, clamp and remote control are included.

The 2-in-1 moisture meter measures in two ways. If you push the two pins into the material, you get the most accurate reading, but you make two small holes. If you hold the back of the meter against the material, you measure without damage. It has separate ranges for wood and building materials, a backlit display and a hold function to freeze the reading.

The cordless screwdriver has a 3.6 V / 2000 mAh lithium-ion battery that you charge in 1.5 hours via USB-C. The cross line laser runs on a 1200 mAh rechargeable battery, charger included. The laser distance meter, the moisture meter and the infrared thermometer each run on 2 AAA batteries, and these are included.